Used RollOff Containers

Shipping Pt. / Location: USA, TEXAS
Scrap Magnets. Used and rebuilt scrap and recycling lifting magnets. Ask about our used Magnets.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, MIDWEST
2012 EZ Portable Log Baler. Bales full size Cars, with Crane, Diesel. Low hours. High production

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1848 American Baler 10% OFF. This American Baler Company model NSB 410 can process 40,000 to 60,000 lbs of material PER HOUR. It has a 125 hp motor (480 Volt, 3 phase) THE PRICE INCLUDES THE DISCOUNT OF 10 %. ORYGINAL PRICE was $55,000.00 minus 10% 50,000.00 USD 10 inch main cylinder that creates 228,000 lbs of pressure A side ram pre-densifying loading chamber that crams bulky materials into the main chamber to increase throughput. It makes very dense bales which are 40" wide, 48" tall, and the auto-tie length is adjustable to your specifications (60" or 72" is typical). We have the complete owners manual with all operating and maintenance manual with schematics, parts and supplies lists for all the mechanical, electrical, and hydraulics systems. Purchased from a Tobacco facility in North Carolina when they were closing down the plant. It was in perfect running condition and was well maintained by techs.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, GEORGIA
Roll-Off Truck. Used RollOff Trucks

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1856 Auto-tie BOA Baler. Auto -tie baler BOA 2200, press power 126 t, constructed in 2002 (placing into operation in 2004), feed channel 1.600 x 1.400 mm, drive power 3 x 55 kW, with pre-press flap and wirbulator/ruffler Technical specifications Manufacturer BOA Machinefabriek BV, Netherlands Type 2200 B 5V.130.165 Year of construction 2002 / start-up of press in 2004 Press power of main press 126 t Forging pressure 280 bar max. Total power 250 kW System voltage 400 V / 50 Hz Controls SPS Telemecanique TSX Premium Feed channel 1.600 x 1.400 mm Bale size 1.100 x 1.100 mm, length variable (large format) Bale weights 600 - 850 kg, depending on material Tying system 5-fold Weight 39 t This machine being in a good condition has been used for paper and cardboard, only. Due to its routine maintenance the abrasion of this press is low. Even miscellaneous spare parts are available to be optionally purchased if required. The main hydraulic cylinder has been replaced by a greater one 2 years ago for better press power of 126 tons. The press will be sold completely with 2 wirbulators and wire drawing units. OB:Europe

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1874 Portable Shear Baler Euromec 600T Raptor. Shear Baler Euromec 600T Raptor brochure available Ask for more details

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1873 – Excel EX63 Auto Tie Baler. BALER: 30"H X 48"D X 60"W BALE SIZE, 800 TO 1,00 LB BALE WEIGHT 20 HP TEFC MOTOR, 3 PHASE, 60 HTZ 460 V TWIN 6" CYLINDERS @ 3000 PSI PRESSURE 159,400 MAX PLATEN PRESSURE SHEAR JAM CORRECTION PROGRAM FULL BALE EJECTION REMOVABLE MULTI-EDGE SHEAR BLADE AUTOMATIC BALE SIZING SYSTEM HYDRAULIC CYLINDER CONTROLLED DOOR RELEASE CONVEYOR STARTER AND CONTROLS 6 GUIDED WIRE TIE SLOTS VERTICAL HIGH LEVEL INFRARED FEED CHUTE WITH SAFETY ACCESS DOOR OPERATOR CONTROL STATION PLC CONTROLLED OPERATION CONVEYOR: BELT WIDTH 48" INFEED HEIGHT 43" TOP OF HOPPER DEGREE INCLINE 30 INCLINE SECTION 15'-0" HEAD PULLEY CENTERLINE 8'3" HORSE POWER 2 BELT SPEED 60 FPM CLEATS 3" HIGH ON 30" CENTERS SIDE SKIRTS 16 APPROXIMATE DIMENSIONS: 25' L X 8' W X 11' H, 15,000 LBS

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1822 Komptech Pre-Shredder. Pre-Shredder made by Komptech Model "Terminator" Single-Rotor Shredder Rotor 3000 mm long, Diameter 1050 mm 24 Tools on Rotor Hours approx 4200 Year 2001, refurbished not so long ago by GETAG AG Deutz 6 Cyclindre Turbo Diesel Engine approx 340 HP Mobile Machine Remote Control Material Infill Height 2460 mm Infill Width 4550 mm Infill Depth 2600 mm Conveyor 1000 mm wide Weight approx 19.200 kg Dimensions LXWXH 6370 x 2450 x 2700 mm Gewicht ca. 19,2 t Last Price Delivered Port in Germany

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1814 Colmar B3000 Diesel w/Crane. COLMAR B 3000 #4 Year: 2010 Motor: Perkins Hour Meter: 10,612.65 hour PRICE INCLUDES DELIVERY

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1806 Sierra RB5000. Sierra RB5000(REBUILT 2015) ON TRAILER Better Built Shipping weight: 15,800 3 (three) Axles Deck length 48” (forty- eight) FOB:Nova Scotia PICTURES AVAILABLE

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1805 Logger Baler Colmar. The Colmar 5260HD baler does a good job baling tin, white goods and cars. With the 6 cylinder motor, it has plenty of power and will even process complete cars with motors, trans & rear ends. The baler has approx. 3,500 hours on it. I will confirm the exact hours and keep you informed. FOB:Southern California PHOTOS AVAILABLE

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1825 Shredder Eidal HT. Eidal 62 x 41 HT Shredder (300)HP A powerhouse of a shredder. This shredder is powered with 2 150 HP hydraulic drives that will do a wide variety of materials including tires, wood, pallets, and e-waste. The machine has 1.2 inch 2 hook double stacked knives and it comes with an infeed and outfeed conveyor. This is a no frills shredder that gets the job done, and parts are readily available. This machine is ready to go to work, and there is a video of the machine in operation at your request. OB:bristol, TN PHOTOS AVAILABLE

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1836 ERS Portable Tire Shredder. 400KW electric service with a 50’ cord with it for the electric hook up. The pictures also show you what we fed it and what comes out with a 2” knife spacing and 4” knife spacing, which is a double stack spacing. The machine has 2 sets of knives with it. Serial 90H 24 P2 1-91 Model 45150 P 460 volts 300 AMPS 3 phrase 60 H2 2-75HP electric motors ERS

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, MERCEDES TEXAS
40 HP horizontal baler. 40 hp Maren horizontal Auto Tie Baler

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1785 Marathon V6030 Low Profile Baler. #1785 - Marathon V6030 Low Profile Baler Model #V-6030-LP-02 Cylinder Bore 7" 10hp 48 second cycle time Electrical Requirements 208/230/460 3 phase

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1869 Harris Horizontal Two Ram Baler. Harris “Badger 100-S-10-7 Horizontal two ram baler Good condition 100 hp motor 10” main ram 7” eject cylinder Bale size 64” x 31” x 45”

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1859 Harris Two Ram Baler. Model: HRB 10A-S Press Box Dimensions:60” wide x 27-1/2’ deep x 172-1/2” long Charging Box Opening:57” wide x 106” long Hopper Opening: 74” wide x 120” long Compression Chamber Size: 38” wide x 29” deep x 60” long Approximate Expanded Bale Size: 45” wide x 31” deep x 65” long Bale Weight (Average): 1. 1400 to 1500 lbs. bulk corrugated @ 10% or less moisture 1500 to 1700 lbs. bulk corrugated @ greater than 10% moisture. 2. 2200 to 1000 lbs. solid waste material @ greater than 25% moisture. 3. 750 to 1000 lbs. (aluminum cans) 4. 1200 to 1700 lbs. (aluminum siding) Bale Volume: 30 Cubic ft. Approximate Expanded Bale Volume: 52 Cubic ft. Baling Cycle: 205 seconds (17.5 cycles/hr) corrugated, siding. 180 seconds (20 cycles/hr) solid waste, cans. A10 hourly Capacity: 12/13 tons/hr (bulk corr. @ 10%) 13/15 tons/hr (bulk corr. @ 25%)

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1863 Excel Auto tie two ram baler. EXCEL MFG 2R9 BALER HORIZONTAL TWO RAM, AUTO TIE ELECTR: VOLTAGE460 V, 60 CYCL, 3 PH 50 HP MOTOR 9” MAIN CYLINDER FEED OPENING 63” X 40” NEW FLOOR LINERS REBUILD PUMP REBUILD WIRE TIER NEW SHEAR BLADES, NEW OIL COOLER, NEW OIL LOCATION: MIDWEST (Transport cost for Buyers account) RECONDITIONED AND IN GOOD WORKING ORDER

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1763 – Harris HRB 8BD-2 Automatic Two Ram Bailing Press – Completely Rebuilt. Harris HRB-8-2/BD automatic single wire tier 2-Ram Baling Press (to be refurbished). One (1) Harris Model HRB-8-2/BD The Harris HRB-8-2 / BD model is a 2-ram baler with a large hopper opening of 3.36m. long x 1.88 wide, (132” long x 74” wide) and 2.13m high. Main features of the machine are as follows: USS 331 series automatic single wire tier system. 49 ton bale door cylinder with 2 x two ton guide cylinders. The HRB-8-2 / BD has a vertically operating bale door, 2 x 100 h.p.  (2 x 75Kw) main motors. 198 tons main ram force · 88 Ton ejector ram; Has NF (Non-Ferrous) liners in the charging box and ram faces. Machine weight: approx 49 tons. Modern hydraulics and electrics. PRICE NEGOTIABLE.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1872 Balemaster w/Auto Tie & Conveyor. Baler with auto tie & conveyor 4025G-6 good condition 6" cylinder 30 HP motor 32" x 27"

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1870 Horizontal Auto Tie Baler. American Baler “PAC 4029-730” Horizontal auto tie baler Good condition 30 HP motor 7” cylinder

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1865 EXCEL Auto Tie Baler. #1865 EXCEL Auto Tie Baler 2R63 60"DIA X 74" STROKE MAIN CYLINDERS 6" DIA X 66" DIA EJECT CYLINDER 105 GALLON OIL RESERVOIR 20 HP TEFC MOTOR 29 SECONDS CYCLE APPROX WEIGHT: 33000 LBS

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1862 AUTO TIE BALER. AMERICAN BALER 13567 F HORIZONTAL,AUTO TIE BALER ELECTRICITY : VOLTAGE 460 V , 60 CYCLE, 3 PH 10” MAIN CYCLINDER 75 HP MOTOR 44” X 28” FEED OPENING NEW CHAMBER FLOOR AND BOTTOM OF RAM UPGRADED WIRE FEED SYSTEM ALL HYDRAULICS / ELECTRICAL INSPECTED AND REPLACED AS NEEDED RECONDITIONED AND IN GOOD WORKING ORDER AVAILABLE; MIDWEST USA ( Transport for Buyers account)

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1846 American Baler. American Baler Model 13567F 10" Cylinder 75 HP 30" x 50" Feed Opening in good working order Used only for Shredded Paper Complete Reconditioning

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1842 Balemaster Open Mouth Baler. 1992 Balemaster open mouth baler This baler has two 75 hp motors and a 12” hydraulic cylinder.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1802 – KILCOM Horizontal Baler. KILCOM Horizontal Baler Global (Kilcom)(Horizontal Baler) Model#777 (Wide Mouth Closed Door) 25 H.P. Dual Voltage (Three Phase Electric Motor) 7” Cylinder x 56” Stroke x 4” Rod 2500 Max PSI 69 GPM Pump OCC Bale Weight 1400-1700 lbs. 150 Gal Hydraulic Reservoir 42” x 42” x 72” Bale Size 48” x 18” Feed Conveyor Included FOB:/ MO

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1784 Compac Horizontal Cardboard Baler. Compac Specialties Hydraulic Horizontal Cardboard Baler. Call us for more details.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1675 – American 5042 Horizontal Open End Manual Tie Baler. #1675 – American 5042 Horizontal Open End Manual Tie Baler 20 HP Voltage 480 Main Cylinder Size 8” Feed Opening 42” x 42” x 61” AS IS

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, FT LAUERDALE FLORIDA
2008 mack 25yrd rear load garbage truck. 2008 mack LE613 25yrd 12.0 diesel auto new tires front-rear $55,000 also 2004 LE613 dual driver $40,000

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, LEXINGTON TENNESSEE
rotary sweat furnace. sweat furnace 1200 lb. cap. one man can operate this furnace. all the stuff too make it work comes with it

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, NORTH CAROLINA
Used Lift Magnets. Used and rebuilt scrap and recycling lifting magnets.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, VIRGINIA
Clothing donation bins . FREDERICKSBURG VIRGINIA CLOTHING DONATION BINS . CLOTHING donation bins any style or size in good condition. Will pay $100 to $300 depending on condition and shipping location, but let me know what you have.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: ITALY, PONDERANO BI
Second hand complete recycling line for car and truck tires. 5000 lbs/hour average output down to 0,3 mm. reground pure rubber can be obtained. All Italian construction. 1st shredding part running, good conditions. 2nd refining part as new, just tested. Good opportunity.Owner is selling for family reasons. Full commissioning available on separate agreement for dismantling, loading, transporting (13 to 15 40'fcl) and all spare parts. Contact us for presentation, photos, layout.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: ITALY, PONDERANO BI
PE PP WASHING AND REGRANULATING LINE 1200 lbs/h. Complete grinding,washing,drying,regranulating line for PE PP 900/1200 lbs/hour. The line is offered completely reconditioned and tested in our premises. Possible configuration with automatic screenchanger, on separate quotation. Exw price, loaded.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ANY CITY ANY STATE
Textile Baler. Used Consolidated double chamber vertical baling machine for 100# Used Clothing bales.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, MIDWEST
Oberlander 1650 Ton Shear. Large Shear 1650 Ton, Oberlander Guillotine.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
#1812 – HRB 10 A 2 Ram Baler REBUILT. #1812 – HRB 10 A 2 Ram Baler REBUILT Harris Baler. Model HRB-10AS Comes with a L&P 342 Wire Tire and an Allen Bradley Computer. In Good condition. Mainly used to bale cardboard material. Applications: Paper stock, secondary fibers and solid waste. Aluminum siding sheet, slips, cans, shapes and skeletons. Press Box Dimensions: 60” W x 27 ½” D x 172 ½” L Charging Box Opening: 57” W x 106” L Hopper Opening: 74” W x 120” L Compression Chamber Size: 38” W x 29” D x 60” L Bale Weight: AVERAGE 1: 1400 – 1500 lbs bulk corrugated @ 10% or less moisture 2: 1500 – 1700 lbs bulk corrugated @ 10% or less moisture 3: 750 – 1000 lbs aluminum cans 4: 1200 – 1700 lbs aluminum siding Bale Volume: 30 cubic feet Baling Cycle: 205 seconds (17.5 cycles/hr) corrugated, siding. 180 seconds (20 cycles/hr) solid waste, cans. FOB:New Jersey

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
# 1635 Rebuil HRB 10 Two Ram Baler. Bale Separation Door; 200 HP Motors - Rewound; 16” Main Ram; 12” Eject Cylinder; 57" x 106" Feed Opening; New Tongue and Groove Main Floor; New Bottom of Ram - tongue and groove; New Side Liners in Main Chamber; New Operator Control Panel with Switches; New A.B. Microprocessor; New laser style ram positioning; Rebuilt US Wire Tier; New Radiator; New Shear Blades; Both Cylinders Reconditioned with Harris Style Packing Head & New Seals

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
Vertical Baler Wanter. Any type. ASAP

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, SANBORN NEW YORK
Foremost granulator. One Foremost SCG1116 20hp granulator, with cyclone and blower,two screens 3/16" and 5/16". One Prodeva 325 shredder 25 hp 18" x 25" chamber 3/4" screen. One Prodeva 325 shredder for parts. All three machines for sale as a package for 12,600.00

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, DANVILLE VIRGINIA
C+M BALING SYSTEMS MODEL CM3430-7237 HORIZONTAL BALER. WE HAVE A C+M BALING SYSTEMS MODEL CM3430-7237 HORIZONTAL BALER WITH CUSTOM BOX DUMPER, INSPECTION FEED CONVEYOR, INSPECTION STAND, AND DUAL OPERATOR CONTROL PANELS INCLUDED. FEED OPENING (L X W) 34" X 30", BALE SIZE (L X W X H) 72" X 30" X 40", COMPRESSION CYLINDER 7" BORE, 52" STROKE, POWER UNIT - 30-HP MOTOR - 460 VOLT, 3 PHASE, DOUBLE PUMP 170-GALLON RESERVOIR, PLATEN FORCE 96,163 LBS, APPROXIMATE SHIPPING WEIGHT 14,000 LBS STANDARD FEATURES: FEED HOPPER 4-SIDES W/ DOOR & WINDOW THRU-BEAM PHOTOELECTRIC EYE PROGRAMMABLE CONTROLLER OVERSIZED SPRING-LOADED RETAINER DOGS SEALED LOAD CHAMBER REPLACEABLE WEAR GUIDES AND STRIPS NEMA TYPE 12 UL LISTED CONTROL ENCLOSURE HYDRAULIC BOX DUMPER RAISED INFEED INSPECTION CONVEYOR RAISED INSPECTION / OPERATOR STAND DUAL OPERATOR CONTROLS PARTS AND SERVICE AVAILABLE THROUGH C+M. NEW UNIT COSTS $58,000 FROM C+M. I can send photos and information. Thanks

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA,
Excavator Shears. Wanted to Buy Excavator Shears, Many sizes.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ARIZONA
Wanted Car Crushers. Wanted to Buy Car Crushers, Let us know what you have.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA,
Scrap Handlers. Wanted to Buy Scrap Handlers, Crawler or Wheeled,Needed with Long Reach and Cab Riser, Let us know what you have.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA,
Aljon 580 Portable Logger Balers. Wanted to Buy used Car Loggers and Balers.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA,
Can Densifiers. Wanted Cp Can Densifiers, Denascan Densifiers and others.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA,
Orange Peel Grapples. Any size, Rotators or others. 4 tine or 5 tine.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ARIZONA
CP Mfg 1200 Can Densifier. Can Densifier, with Conveyor, CD 1200, 230 volt, 3 Phase. 1200 to 1900 lbs per hour.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA,
Mosley TC 60 Baler. Bales non-ferrous, Sheet Irin, 4' x 8' Box. 50 Hp Electric.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROGERS MN
2006 EZ Portable Log Baler. Bales White Goods, Tin, Metals. W/ Crane, JD Diesel.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---